Being just a bit shorter than the iPhone 5s, the Aspire PockeX is the ultimate pocket All-in-One (AIO) device. Packed with a 0.6Ω stainless steel U-Tech coil, the PockeX is a sub-ohm device. The PockeX has a wider drip-tip and larger top-airflow allowing for increased vapor production.
PockeX’s discrete size and low-profile sub-ohm vapor production makes the PockeX your must-have vape while indoors or on-the-go.
2mL TPD-Compliant Juice Capacity
Integrated 1500mAh Internal Battery
Direct Voltage Output System - Bypass
Single Button Operation
Top Airflow Design
Leak-Proof Top-Fill Method
Aspire U-Tech Coil Inspired Technology
Note: Does not use the same coils as Nautilus X
0.6ohm 316L SS PockeX Coil Head - rated for 18-23W
Charge via MicroUSB Port
1 Aspire PockeX Pocket AIO
1 Preinstalled 0.6ohm 316L SS PockeX Coil Head
1 Extra 0.6ohm 316L SS PockeX Coil Head
1 MicroUSB Port
SMOK - G-PRIV Luxe Edition with TVFV12 Prince Sub-Ohm Tank
Are you ready to check out one of the most compact pod starter kits on the market? Then get ready for the Minifit Kit by Justfog! Justfog is well-known for producing high-quality compact vaporizers for the vaping community. This small and compact All-In-One-System makes an ideal stealth pod vaporizer.
The Minifit Pod Starter Kit by Justfog features an internal 370mAh battery which is convenient to charge via the included Micro USB cable and Micro USB Port. Great for an all-day vaporizer for those vapers that are out and about for a night with friends or while at work. After you’re finished vaping you can slip the Minifit easily into your pocket or into a bag. The Minifit features an LED battery indicator light which shows you three different battery level indicators.
The refillable pods on the Minifit by Justfog feature a 1.6-ohm coil that utilizes Japanese organic cotton coils. They are pumping out some dense and delicious vapor and work extremely well with the popular nicotine salt e-liquids. For such a tiny little vaporizer the Minifit by Justfog is punching above its weight by producing some delicious vapor. If stealth vaping is something that you’d be interested in, then you definitely need to check out the Minifit by Justfog!
The Minifit has an easy to use firing button that’s small and discreet enough not to be any problem when you’re slipping this pod system into your pocket or bag. The pods on the Minifit have an average 1.5ml e-liquid capacity that will last most vapers several hours before they need to replace or refill them. When you first open your Justfog Minifit Pod Starter Kit for the first time, take a quick look at the excellent operating guide which comes with the device, it will help explain how the vaporizer operates.
Dimensions - 70mm by 21mm by 15mm
1.5mL Juice Capacity
Constant Voltage-Based Output
Single Button Operation - Firing Mechanism
Ergonomic Trim Design
1.6ohm Resistance Coil
Replaceable Cartridge Design
LED Battery Light Indicator
MicroUSB Charging Port
1 MINIFIT Battery
1 MINIFIT Pod
Please have a great understanding and technical knowledge on how to use this product in order to properly use it.
We highly recommend using an external battery charger for 18650 battery mods, as it helps with balanced charging and prolong the life of the battery and mod, such as from worn out microUSB port.
Simple, elegant, super-efficient and leak-proof, the STIX is a discreet vape pen designed for ejuice and thinner concentrates. Offering up the great flavour and crystal smooth texture. Remarkably ease of use. Besides, the adjustable low / middle / high voltage will also provide better customer experiences. designed with a ceramic coil delivering huge amount of flavour and great vapor. This pen is capable of handling E juice or our favourite concentrate. Please note that the mouth piece may clog if you are using a thick distaste. Mig Vapor is better for thick oils.
Innokin is renowned among the vaping community for producing high-quality vaporizers and there latest vape the PocketMod 200mAh starter kit is no exception. The PocketMod features a unique low-profile design which is compact and stealthy, easily slipping into a pocket or bag when you’re not using it. If you’re a beginner vaper that’s looking for a simple yet effective starter kit, then the PocketMod 200mAh Starter Kit by Innokin is a great place to start.
The PocketMod features a pre-installed 0.35Ω coil which means that it will be ready to vape straight out of the box. It also includes a 1.2Ω ready to go when you have to change coils or if you prefer a smaller coil. You can choose between Mouth To Lung (MTL) or Direct To Lung (DTL) vaping.
One of the great things about the PocketMod is its simplicity. You don’t have to worry about operating a complicated display screen. The PocketMod features a simple to use firing button that is conveniently located on the front of the vaporizer, and its design is comfortable and ergonomic to hold. It’s available in five stylish colors, blue, purple, black, grey and red. There’s sure to be a color to suit everyone!
The 200mAh battery on the Innokin PocketMod is great for vapers on the go and will last through the day. The internal 200mAh is rechargeable via the Micro USB port which is convenient to use. That makes charging simple, fast and easy. The PocketMod also features pass-through technology that means even if you need to charge your vaporizer, you’ll be able to vape while it's on the charger.
The top fill system on the PocketMod is easy to use and makes filling the 2ml tank convenient. Less mess means more vaping and less cleaning! When you first open your PocketMod Kit for the first time, take a quick look at the excellent operating guide which comes with the device, it will help explain how the vaporizer operates.
The next generation Innokin Endura T18.II vaporizer kit gives you the freedom to easily tune the heat and airflow to create a personally perfect vape experience.
Powered by the T18 Prism coil for maximum flavour and enjoyment, the T18.II has a magnetic cap that keeps the drip-tip clean and clicks to the base while vaping. Built with top standards in quality and engineering, the 1300mAh battery is charged via micro-USB and features proven safety protections.
Vaporesso Gen kit consists of the GEN TC Box Mod and a SKRR-S Tank. Powered by dual 18650 batteries, it is capable of firing up to the max output of 220W. Equipped with a 0.91" OLED screen, you can get to know the vaping data easily. GEN's casing is made from 4 layers of coating, which provides smooth touch feelings. With pulse mode, AXON will continuously give you a hit throughout your puff (every 0.02s) – not just from the initial fire - giving you more powerful and flavourful clouds with every puff. With power ECO mode turned on, it will optimize your devices settings to give you that extra vaping time you need. The included SKRR-S Tank comes with 8ml large e-juice capacity. SKRR-S also features QF air distribution system, which will provide exquisite flavour and create a perfect balance between taste and cloud chasing. Available in 4 colours: Silver, Black, Black Red, Black Blue.The mod gives you a soft rubber-like feel, yet still smooth to the touch.
Powered by dual 18650 batteries with 220W max output
8ml large e-juice capacity
Advanced AXON chipset, easier to operate
0.91 inch OLED screen for displaying the vaping data
Pulse mode and ECO mode for powerful and flavourful cloud
Soft touch casing, scratch and flame resistant
Human centered UI
Easy top filling design
QF air distribution system
1 x Vaporesso Gen Mod(no cells)
1 x Vaporesso Skrr-S Tank8ml
1 x QF Meshed Coil 0.2Ω (Pre-installed)
1 x QF Strip Coil 0.15Ω
1 x Replacement Glass Tube (5ml)
2 x O-Rings
1 x USB Cable
1 x User Guide
1 x Warranty Card
Smoking Vapor Mi-Pod 950mAh Kit | Super Portable | Easy to use
Smoking Vapor Mi-Pod Kit is as good as new, and all the design shortcomings from previous models have been taken care of, making it one of the best pod kits there is in the market. And guess what? In case you find that your mi-pod still has issues, SV will replace it for you, how cool is that?
The kit is designed to be compact and tiny such that you don't feel like there is anything you are carrying. It comes with a lanyard that allows you to hang it on your neck or even together with your key and it is barely noticeable with its 40gms weight and the size is not any bigger than a lighter likely to fit in any pocket.
Smoking Vapor Mi-Pod Kit is not only small but also functional. In it, there are two pods holding 2ml of e-liquid each. Its small size makes it discreet, hence it is a good device to carry along when going about your day to day activities.
The Mi-Pod is refillable and quite easy to maintain. To refill it, remove the pod, unplug the rubber seal and fill it through the hole on top using glass droppers. Once you have refilled the pod place it back in the kit, and let it sit for a few minutes to allow the wicks to saturate. You can fill your pods with your vape juice of choice from the clear unflavoured ones to the dark juices featuring your favourite flavours.
The device is draw activated; thus, even though it has a power button, you do not need to switch on and off as it will be automatically switched on once you draw. The kit is equipped with an innovative open airflow allowing the user direct lung draw. There is no need to keep adjusting the atomizers and tanks. All you need to do is fill the pods and enjoy your vape.
This Mi-Pod kit is equipped with a powerful internal lithium battery [950mAh] charged using a micro USB charging cable. Also, three LED buttons help you keep track of battery usage. The LED lights blue when the battery is between 4.2 and 3.7 volts, purple when it’s between 3.7 to 3.4 volts and red when it goes below that. The LED is placed inside, making it somewhat challenging to see the LED light when vaping. Therefore, you need to quickly remove the vape from your mouth after vaping for you to get a glimpse of the LED light.
The Mi-Pod has an M logo on its side that functions as the window to view the e-liquid, making it not only aesthetic but also functional. It may not be effortless to check the e-liquid from the logo for the first time, but it gets easier with time. The kit comes in various colours for you to choose from depending on your taste, there are over twenty colour configurations from the black, gold, leathery look, and glittered among others in their collection.
If you have not purchased this device already, log in to your best online vape shop and get yourself this awesome piece and enjoy your new vaping experience. It doesn’t matter whether you are a newbie or an expert in the e-cigarette’s world; it works for everyone.
The Exclusive Collection Mi-Pod kit features a sparkling finish and includes 2 pods along with a lanyard for easy transport.
The D1 Disposable Oil Vape Pen by Mig Vapor is perfect for all types of herbal extract oils, thick or thin. The 1mL built in tank has four (4x) 1.2mm intake ports to the ceramic coil, and the 310mAh battery is rated for 250 puffs.
Vandy Vape ,Tony B from Vaportrailchanel along with Stefan Z have all come together to create the Pulse X BF 90W stater kit. The spring loaded 510 and locking power safety switch makes the Pulse Squonk Box Mod the safest mechanical mod ever!
The Pulse X bottom fed system uses an 8ml easy grip bottle and a 30ml refill bottle Copper contacts w/o wires; directly connects the switch to 510 w/ optimal conductivity, and two access points on the back for easy removal of battery and food grade silicone bottle.
The Pulse X is compatible with either 21700 (sold seperately), 20700 (sold separately) or 18650 (sold separately) batteries with a battery adapter included in the device.
u a 0.5 to 8.5V output range, 0.05 to 3 ohm resistance range in variable wattage mode, and a 0.05 to 1.5 ohm resistance range temperature control resistance mode.
Dimensions: 77mm by 50mm by 27mm
Powered By Single High Amp 18650/20700 Battery (Sold Separately)
Bottom Feeding (Squonk) Design
8ml Food Grade Silicone Squonk Bottle
Nylon & ABS (Heat Resistant Thermoplastic Polymer) Construction
Compact & Lightweight
Oversized Firing Button
Safety Lock Switch
Interchangeable Dual Magnetic Frosted Battery Panels
Copper Battery Contacts
Spring Loaded 510 Pin
Special Edition Matte Black Color
Superior Stainless Steel Construction
Lower Profile Design Than Pulse 22 BF RDA
Increased Flavor Production
Postless Build Deck
Designed For Single & Dual Coil Configurations
Quad 2.8mm Terminals With Side Tension Via Phillips Screws
What happens when intense vaping is combined with good music? Well, the WISMEC- Active NSE Kit is born. Here to give a brand new take on vaping, this ultra-modern mod kit is known for its compact and versatile design featuring an e-cigarette and innovative bluetooth speaker. The shape of the device is similar to an advanced portable speaker, offering a fashionable and exquisite look to the entire kit. Simply after holding it, you'll be able to feel the incredible charm of this one of a kind vaping mod, reflecting that each and every detail has been meticulously crafted and designed by the industry-experts of WISMEC. In addition, the stylish mod box is engineered to be waterproof, dust proof and shockproof, which guarantees effortless movement and music.
Equipped with the newest Amor NSE 3ml (e-juice capacity) atomizer, this mod kit supports two vaping modes: MTL and DL. Plus, as per the TPD regulations, there are 4 different versions of tanks available too, no matter what you choose- a good vaping experience is assured! Another star attraction of this unique device is the refined air control flow system and retractable top filling solution. Just slide the cap present at the top and you'll be able to refill in no time. While, the control system lets you enjoy great vaping through accurate and sophisticated airflow.
The Amor NSE atomizer comes with detectable parts, which means you can remove and reassemble them again for complete cleaning. The WISMEC- Active Kit is powered by 2100mAH built-in battery which is capable of firing almost 80W of power and offers high performing TC/VW working modes too. When required, you can charge the device with the help of the Micro-USB port that can be connected to wall adapter or computer using the provided USB cable. In order to ensure that you are able to make the most out of it, the mod kit comes with upgradable firmware that will allow users to keep their device up to date every time.
Thanks to the hook-design, the WISMEC Active Kit can be placed anywhere- right from your backpack hook to the trouser hook and more. This multi-functional kit is indeed defines the future of vaping and is something that you will never regret buying.
The kit includes a QC USB cable, Hook, Armor NSE, Warning Card, User Manual and few essential spare parts.